Yep, that's the stuff

 

Except it's a cow :laughing:

This one was a pig.

 

All done! Put this warehouse up at a gas plant for the operators to store things during the second phase of plant construction. After that it'll be a maintenance shop. In floor heat, lunch room, bathroom. Not a bad place to work. Fun job, went smooth. I'm looking forward to not wearing FR clothing all the time for a while.

 

The site is covered in snow now but supposed to be mid 40s next week. Hopefully we fly main trusses tomorrow even with both my truss companies having cranes down and operators sick.

Sent from my SM-N950U using Tapatalk

 

Are those one bedroom houses?

 

Finished!!! long haul on a big @ss job for me. :whistling Chose to make the final deposit over taking final pictures with knobs and such. Got some extras to wrap up maybe then.


Pics don't include the 32x72x42 18 drawer chest for a WI closet and "wine bar off the kitchen. All cabinetry by me ;P

 

Finished!!! long haul on a big @ss job for me. :whistling Chose to make the final deposit over taking final pictures with knobs and such. Got some extras to wrap up maybe then.

That bath counter is exceptional.

 

Real feel outside was 13 this morning, made me almost enjoy spackling today

-Rich

 

We run a vac on our ceilings, walls, and floors after our drywall finisher is done to ensure everything is ready for our painters. Plus it gives us an opportunity to inspect things before paint. Glad it's nice and warm inside...about 15 degrees today...[emoji45]

 

It has been a rough November, December for weather. Getting closer on this damn thing.

 

We shall rename you. Hereforth, your name will be Vincent.

 

What are you using to make the radius decking pieces? Track saw?

 

Radial saw?


Sent from my iPhone using Tapatalk

 

Playin' truck ass.....I'm pretty sure at this point they think I am the builder. [emoji1787][emoji1787][emoji1787]

 

Doing some work on my own place. First time playing with vinyl plank.
Found a few surprises when taking things apart. Missing insulation behind large trims and a cantilever I'll have to pull apart in the spring.

 

Doing some work on my own place. First time playing with vinyl plank.
Found a few surprises when taking things apart. Missing insulation behind large trims and a cantilever I'll have to pull apart in the spring.

why you putting it on the ceiling?

 

I was going to turn the picture but as soon as I try to save it, I get a big red screen message saying it is dangerous to download.
Does that with any picture posted through Tapatalk.

 

why you putting it on the ceiling?

That's odd, it formats right thru Tapatalk. I'll try and reupload.

 

 

I tried reuploading several times. I don't know what's up.

 

I took a screen shot so it’s a fresh file.

 

I never could roto-zip in a straight line, so this came quite naturally to me.

 

...

 

https://photos.app.goo.gl/EEGPaPcKSYbX2Vcs7

 

Able to finally get to that multi family house that I’ve had to re schedule 4 times because of all the chitty weather. 4 of us got it done in a little over a day. Brother In law got the short straw lol.

Sent from my iPhone using Tapatalk

 

And now there's an Owl added to my cutting board farm. This one is for my wife.

 

Who?


Mike.
_______________
[emoji631] [emoji631]

 

You know who.

 

Finally got good enough weather to do this little roof area Friday and Saturday I did the house in 96 but we reused the skylights. The flashing finally quit around the curbs.

What a hassle, as usual these days. She insisted on Bubble skylights which was not easy to find since the original manufacturer was ODL and no longer making them. I had to buy screws, 2x4, bronze coil and weather stripping.

 

Looks nice in the end despite all the hassle.

 

Little desk area I made for my girlfriends daughter. Don’t worry, won’t quit my day job lol.

Sent from my iPhone using Tapatalk

 

Now you need a hole and grommet to feed wiring through.

Is there an outlet under the window?

 

No flashing?

 

I was wondering what type of gutter was going to be installed, and the sized downspout for when spills happen.

Sent from my SM-N950U using Tapatalk