Post A Picture Of Your Current Job (Part III)
1 reading
Admin
5,081 - 5,100 of 11,949 Posts
That looks great man !129 sf of quartz went in today![Image]()
![Image]()
Sent from my SM-N986U using Tapatalk
Not sure why I do this to myself....one of these days I'll keep my mouth shut and my bright ideas too myself...lol
About 7 hours per opening[emoji2357]
![Image]()
![Image]()
Sent from my SM-G988U using Tapatalk
About 7 hours per opening[emoji2357]
Sent from my SM-G988U using Tapatalk
Nothing wrong with big windows man.Not sure why I do this to myself....one of these days I'll keep my mouth shut and my bright ideas too myself...lol
About 7 hours per opening[emoji2357]![Image]()
![Image]()
Sent from my SM-G988U using Tapatalk
Thanks reggi...on the brightside I guess I'll have these damn complex window wraps down when I start siding my house
Sent from my SM-G988U using Tapatalk
That’s easy, just tyvek it. lol
I lost today.
![Image]()
Im grading out about an acre for a parking area.
Big stump on the edge. I really wanted to get rid of it.
Spent an hour digging around it and under as much as I could. It didn’t even wiggle. Not even a little.
Took the big 25k lb tele-handler and hit it. Didn’t even move a millimeter.
Covered the damn hole back up and got to grading. 🙄
Im grading out about an acre for a parking area.
Big stump on the edge. I really wanted to get rid of it.
Spent an hour digging around it and under as much as I could. It didn’t even wiggle. Not even a little.
Took the big 25k lb tele-handler and hit it. Didn’t even move a millimeter.
Covered the damn hole back up and got to grading. 🙄
That’s a big one for sure.
I thought they sell c-4 in the minimarts out that way, next to the jerky.
Just remember you have to be 15 to buy them.
Joined
·
5,343 Posts
rblakes:
Unless there is some steel that I can't see under those countertop cantilevers, they are going to sag. And when they sag the countertop from that slide-in cutout to the edge is going to crack. Hope there's manufacturer-specified minimum radii in the corners and the cutout is polished. Some heat conductive tape wouldn't hurt either. Steel above the legs too.
I'm assuming the hood above the cooking appliance hasn't been installed yet? Downdrafts suck. Well, no they don't and that's the problem.
Unless there is some steel that I can't see under those countertop cantilevers, they are going to sag. And when they sag the countertop from that slide-in cutout to the edge is going to crack. Hope there's manufacturer-specified minimum radii in the corners and the cutout is polished. Some heat conductive tape wouldn't hurt either. Steel above the legs too.
I'm assuming the hood above the cooking appliance hasn't been installed yet? Downdrafts suck. Well, no they don't and that's the problem.
Joined
·
9,413 Posts
You give up to easy, that's a two day stump. 🤓
🤣
I know.
I’ll go back to it. 👍
Im racing the return of the rain. I wanted to get to this parking lot a month and a half ago, and the rain came a month early. 😳 So I’m almost three months behind. 🙄
I really need to get some rock on the ground.
I’ll either grind it……or something else. I don’t have a machine big enough to probably even roll it, even if it were completely loose.
Maybe a chain around my 5500, in low 4x4? 😳😬
I know.
I’ll go back to it. 👍
Im racing the return of the rain. I wanted to get to this parking lot a month and a half ago, and the rain came a month early. 😳 So I’m almost three months behind. 🙄
I really need to get some rock on the ground.
I’ll either grind it……or something else. I don’t have a machine big enough to probably even roll it, even if it were completely loose.
Maybe a chain around my 5500, in low 4x4? 😳😬
Joined
·
2,945 Posts
Yup, 1/4" steel around the range
Fabricators signed off on the overhangs on the seating end of the island. Peninsula overhang is about 10", back of island is 11"
Sent from my SM-N986U using Tapatalk
Kind of an awkward space in a hallway client wanted filled.
![Image]()
I like it…if it’s somewhat close to an exterior door I’d probably use it to throw my truck keys, pocket knife, wallet etc down on a daily basis
Installed a small vanity in a small bathroom. Did a double take at the size of the door when I got there. 23 5/8" wide. 24" deep vanity. DOH.
Got it in fine. Had to take off the faux top drawer front. and the scribing stile went in first.
Did the floor in the bathroom too. HO sanded and cleared it.
The room will be getting wainscoting too.
![Image]()
Got it in fine. Had to take off the faux top drawer front. and the scribing stile went in first.
Did the floor in the bathroom too. HO sanded and cleared it.
The room will be getting wainscoting too.
5,081 - 5,100 of 11,949 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
