I love going by areas where I built houses or additions or did a large remodel, but the funniest one is just at the top of my street. I built a bump out for a shower on the second floor of a bungalow., they had short pockets to finish the exterior and it was suggested that I put roofing shingles on the sidewall to get them through the winter….. that was 40 years ago😂 I’ll try to get a picture and post it up here later because it’s still there.View attachment 567744
Not my current job; I built this air conditioner surround over 30 years ago. The lattice is cedar with resorcinol adhesive at the laps. A little Abatron on the finials and it'll go through another 30 Ohio winters; longer than I will.
When I rented a car in Dallas last month, there was a big 'ole sign on the counter saying I was responsible for hail damage to the vehicle, so put 'er inside.
You can do this? Hack away most of the joist and put a "duct" through it?
View attachment 567962
I would expect it to survive because of the design of the I beam system. I've just never seen one taken out so completely and it a couple spots in one beam. If you did that to a normal joist it would have crumbled years ago. But the integrity of the 2x3s isn't broken and the stiffness of the OSB is still there in 90%+ of the I beam.
Seems to have worked.
Would they allow that now?
That would fail inspection bigtime around here.
Failed inspection in my eyes too. Hence the question. But look how it survived.That would fail inspection bigtime around here.
Making your own Stone Henge?