The posting of current job pictures is a great thread, I thought I would start a new thread for members to post interior and/or exterior shots of their job site trailers. I have an ulterior motive, since I am picking up my new 16 x 7 tomorrow, and need some more ideas on how to fit it out. :thumbsup:
Job site trailers, show off your set ups!
1 reading
Joasis
2,861 - 2,880 of 3,122 Posts
Joined
·
125 Posts
I have a similar problem.
It's easy (though time consuming) to set up a trailer that only carries tools. It's tough when you add in hauling materials, cabinets, furniture, demo debris, etc.
What I'm leaning towards at the moment is an enclosed trailer with a "tool room" in the front portion accessed from the side door, then a wall with another door inside it separating the tool room from the main area.
Ladders, levels, sawhorses, etc, can be stored on one wall of the main area, leaving it mostly open for stuff that changes from job to job.
I also prefer to work in my shop rather than on site when possible, so I don't want a "rolling wood shop" like Ron Paulk's setups, nor do I want to have spend a lot of time loading tools from my shop to trailer.
Joined
·
6,381 Posts
I can tell you that I've outgrown my 7x12 trailer for tools. It is the best size though. Fits in a parking space
Joined
·
2,781 Posts
I've about had enough of my current trailer layout. Going to change it, hopefully before next spring.
I really think I want a bathroom, in the front. I don't see any reason I can't do it. There is one in my camper, that takes up about as much room. I have relative easy access to a dump station.
Also need a grab bar at the back door. Or a step that can be set down, when the trailer is open. Even with a step, I will need a grab bar.
Our tools have also changed. We don't use as many air nailers as we used to. Have gone to cordless and I don't see us going back. I just used the cordless DeWalt for a garage and it worked great. For a house I could see me using an air nailer, but I don't really bid those much anymore. Really don't have the desire to build one either.
I really think I want a bathroom, in the front. I don't see any reason I can't do it. There is one in my camper, that takes up about as much room. I have relative easy access to a dump station.
Also need a grab bar at the back door. Or a step that can be set down, when the trailer is open. Even with a step, I will need a grab bar.
Our tools have also changed. We don't use as many air nailers as we used to. Have gone to cordless and I don't see us going back. I just used the cordless DeWalt for a garage and it worked great. For a house I could see me using an air nailer, but I don't really bid those much anymore. Really don't have the desire to build one either.
Joined
·
51 Posts
Can you tell us more about your solar panel setup? I'm interested in what you're powering and how you built it out?
I am also thinking about changing the layout of my trailer and adding some electricity. I have a 7x14 v-nose, all aluminum. Things I want to do in my overhaul are:
1) couple outlets inside for charging batteries, phones, laptop.
2) lights inside and outside light at loading area.
3) setup so I can power off job-site, generator, or battery & inverter.
4) rigid insulation on the walls.
5) Milwaukee pack-out for organization and tool storage. So I can empty out trailer quickly and move materials.
I would appreciate any advice or suggestions on the best materials and the logistics of setting up electrical system.
Sent from my iPhone using Tapatalk
1) couple outlets inside for charging batteries, phones, laptop.
2) lights inside and outside light at loading area.
3) setup so I can power off job-site, generator, or battery & inverter.
4) rigid insulation on the walls.
5) Milwaukee pack-out for organization and tool storage. So I can empty out trailer quickly and move materials.
I would appreciate any advice or suggestions on the best materials and the logistics of setting up electrical system.
Sent from my iPhone using Tapatalk
Joined
·
1 Posts
Joined
·
485 Posts
Alright... Thread kinda died out so let's bump it.
Here is my 2018 7x16 I got yesterday. All aluminum. 6' 6" interior height. Just thought some would want to see a picture or two. Will be doing a thread on the build out but that will come after I flip the Mustang I'm working on. I do low voltage and handyman work if anyone is wondering.
![Image]()
Sent from my SM-N950U using Tapatalk
Here is my 2018 7x16 I got yesterday. All aluminum. 6' 6" interior height. Just thought some would want to see a picture or two. Will be doing a thread on the build out but that will come after I flip the Mustang I'm working on. I do low voltage and handyman work if anyone is wondering.
Sent from my SM-N950U using Tapatalk
Joined
·
1,691 Posts
That's a hell of a trailer for that kind of work. Should be able to fit EVERYTHING in that baby!
I have a 6x10 v-nose right now. I miss my 7x14 but I just couldn't fit it in half the driveways we needed to get into for work. Just had to get very efficient with the storage on this one. The only thing I don't have with me all the time that I'd like to is my table saw.
Sent from my SM-G950U using Tapatalk
I have a 6x10 v-nose right now. I miss my 7x14 but I just couldn't fit it in half the driveways we needed to get into for work. Just had to get very efficient with the storage on this one. The only thing I don't have with me all the time that I'd like to is my table saw.
Sent from my SM-G950U using Tapatalk
Joined
·
9,139 Posts
Try the Dewalt cordless. It's surprisingly capable.
Joined
·
485 Posts
Thanks. Yeah it's going to be my mobile cammand center for my business. Might even let go of my ladder rack on my truck. I'll list all my plans for the up fit in my thread.
I'll be buying the Dewalt cordless table saw shortly. Going all cordless with my tools.
Sent from my SM-N950U using Tapatalk
Joined
·
1,691 Posts
Just spent $600 on the model with the collapsible stand on board. I do everything I possibly can to not have to kneel or crawl around.
Doesn't matter anyway, the trailer is absolutely fully packed out.
I am obsessed with the idea of buying the 60v mitre saw, even though I don't really need it.
Sent from my SM-G950U using Tapatalk
Joined
·
141 Posts
If you're going to get a DeWalt 12" slider it makes no sense not to get it. I got mine on Amazon with no batteries and the corded power converter for 150$ less than the regular corded saw HD or Lowe's had. I then waited until the 9ah batteries went on sale and ended up getting the flexvolt 12" slider w/ 2 9ah batteries for only 50$ more than the old corded version.
Sent from my Pixel using Tapatalk
Joined
·
13,759 Posts
What do you think about the size? Big enough? I’m trying to decide between the 16, 18 or 20.
Joined
·
485 Posts
Yes for what I do it is a perfect size. I'm glad I didn't go 8.5 ft wide as well. I haven't had time to do anything inside yet except work but I will get it done.
Sent from my SM-N950U using Tapatalk
Joined
·
1,160 Posts
Love the flexvolt table saw. I have the 12” flexvolt miter saw that sits in the shed most of the time. Only get it out when there’s a lot of cutting or big cuts.
I picked up the 7-1/4” 20v miter saw and find I use it more due to the lite weight and portability of it.
I find I keep downsizing and making things as efficient as I can.
I picked up the 7-1/4” 20v miter saw and find I use it more due to the lite weight and portability of it.
I find I keep downsizing and making things as efficient as I can.
Joined
·
485 Posts
Man this thing is sick. I love Milwaukee but Dewalt has some awesome tools.
Sent from my SM-N950U using Tapatalk
I have very little brand loyalty, but DeWalt did a great job with FlexVolt. Providing big powerful tool, reasonable prices and batteries that are backwards compatible....I respect em for that.Man this thing is sick. I love Milwaukee but Dewalt has some awesome tools.![Image]()
Sent from my SM-N950U using Tapatalk
Sent from my Nexus 6P using Tapatalk
Joined
·
2,781 Posts
I would agree, this thread has slowed down alot.
I didn't do any remodeling of my trailer. I'm still considering a bathroom.
I did, however, make an improvement. Our brake is in the trailer. We had a job that needed alot of aluminum. So far I've gone through 5 rolls. This means someone is in the trailer, most of the day, bending. The first day, it was me. It's been in the 90s. We have fans, but that was just blowing 100 degree air.
The second day, I installed an air conditioner. Just a small window unit. I built it in, right inside the walk door. We've never used it anyway. Just opened it up for some air movement.
Now we can shut the door and you don't even know its there. When we want to use it, we open the door and plug it in. I made an aluminum tray, that can be folded down, when not in use. When it is in use, fold the tray up and it will catch the condensation and extend it outside the step.
We still kept a fan going. At least one of the barn doors are open during the day. Still keeps it fairly decent in there.
I didn't do any remodeling of my trailer. I'm still considering a bathroom.
I did, however, make an improvement. Our brake is in the trailer. We had a job that needed alot of aluminum. So far I've gone through 5 rolls. This means someone is in the trailer, most of the day, bending. The first day, it was me. It's been in the 90s. We have fans, but that was just blowing 100 degree air.
The second day, I installed an air conditioner. Just a small window unit. I built it in, right inside the walk door. We've never used it anyway. Just opened it up for some air movement.
Now we can shut the door and you don't even know its there. When we want to use it, we open the door and plug it in. I made an aluminum tray, that can be folded down, when not in use. When it is in use, fold the tray up and it will catch the condensation and extend it outside the step.
We still kept a fan going. At least one of the barn doors are open during the day. Still keeps it fairly decent in there.
2,861 - 2,880 of 3,122 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
