Contractor Talk - Professional Construction and Remodeling Forum banner
Cancel
Create thread New Forums

Ditra Failures??

Jump to Latest
121K views 45 replies 20 participants last post by  Bill_Vincent  
J
#1 ·
Has anyone had any failures (or heard of any) when using Ditra?
I have encountered 2 people here who had it installed and are having constant problems with grout and tile cracking. Both installations "seem" to fit Schluters criteria, however, since I didn't do the jobs, I have no idea what was used for mortar.
In talking with a supplier (who doesn't sell Schluter), he says he sees it all the time - when ditra is installed on a single ply subfloor (5/8")

His explanation was that just because houses are "supposed" to have floors meeting deflection requirements, that doesn't mean they do!!

I have been using Kerdi for years - love it, and was starting to use ditra, but certainly don't want problems down the road.

Anyone else heard anything??
 
P
#3 ·
The biggest reason for failure is not following directions. The thinset used to install the Dita must be modified and it must be mixed loose enough to ensure good saturation of the fleece. Then the Ditra must be embedded in the thinset with direct pressure. I use a wall paper roller, but a grout float, flat side of a trowel, drywall knife, etc. will work. The key to installing it is getting the fleece properly embedded in the thinset. Outside of that I know of no failures.
 
Save
Reply Quote Like Like
R
#22 ·
PrecisionFloors said:
The biggest reason for failure is not following directions. The thinset used to install the Dita must be modified and it must be mixed loose enough to ensure good saturation of the fleece.

Good call
This is the biggest issue for good adhesion. Mix almost a watery consistancy, not as though you are used to when setting. You should be able to see a grayish color consistant through the Ditra orange.
Click to expand...
 
#4 ·
jarvis design said:
Has anyone had any failures (or heard of any) when using Ditra?

... when ditra is installed on a single ply subfloor (5/8")

... but certainly don't want problems down the road.
Click to expand...
If you don't want problems down the road - no single layer of 5/8 plywood only, I can't think where that would meet any deflection standard

I could almost guarantee that you would have the same problems with regular backer board.
 
J
#5 ·
I don't see a scenario where Ditra can be blamed for a tile failure. If it doesn't stick to the floor, it's the fault of the installer for using the wrong thinset or not applying it correctly. Another reason would of course be too much deflection in the subfloor or bad prep. Ditra can not cause a problem, it can only prevent them.

Yes 5/8" plywood single layer subfloor is very scary and I would not recommend going over it unless the joists are at 12" o.c. or less. Manufacturers might tell you 5/8" will work, BUT they also ALWAYS tell you the floor must meet L360 deflection and IRC code. Sometimes this info is not highlighted so not to scare off potential customers.

Jaz
 
Save
Reply Quote Like Like
B
#7 ·
DITRA when installed properly is warranted over a 5/8" plywood T&G subfloor. I too am not convinced that's enough subfloor thickness. In a lot of areas the 5/8" subfloor is the minimum building code so I suppose that is why Schluter has chosen to warranty their product over 5/8". The cost of the DITRA along with the need to add additional subfloor thickness would push them out of the market in a lot of cases.

Many builders either build to the absolute minimum to save money or they just simply don't know what to do.

I recently inspected a tile installation over DITRA where the installer was blaming the DITRA for the failure. This case went to court. It was my finding after an invasive inspection that the DITRA had not been properly adhered to the substrate. All other criteria surpassed minimums.

There were areas that the DITRA backing had never been saturated with thinset. The thinset was there but it didn't get absorbed into the DITRA fabric. A 1/4" notched trowel had been used to install the DITRA and of course it was obvious the thinset had been applied too thick. In an effort to spread the thinset under the DITRA mounds of thinset developed creating humps in the DITRA and resulting in tile lippage.

I know of no DITRA failures anywhere.;)
 
Save
Reply Quote Like Like
M
#9 ·
I've yet to tear out any tile installations from the 60s - 70s that had Ditra, or any other Schluter products. So I'm not so certain on the validity of their warranty. I do believe their company to be the "scientists" of the tile industry, and they offer quality products.
I've always liked their metal profiles and transitions. And the fact you can purchase their products at The Home Depot and Lowes, makes it very convienent for do-it-yourselfers to use in their projects.
I just wish more of my customers liked metal in their residential tile applications. Most of the homes we work on we just use traditional tile details like bullnose and miter cuts. They don't even want metal around their showers' glass enclosures, never mind touching their tile.
 
Save
Reply Quote Like Like
C
#10 ·
I would never feel comfortable laying tile over a 5/8" subfloor. Even if joists are 12"o.c. a 5/8" sub is really springy. At least 3/4"T&G for ceramic at 16oc joists. 3/4"T&G laid perpendicular to joists followed by additional 1/2" ply for natural stone.

OTOH, I've walked on ceramic floors with noticeable deflection as I walked across them, and no problems after using ditra.
 
J
#13 ·
I would like to thank you all for the replies. I tend to agree with the notion that a lot of problems are caused by poor installation or, as mentioned, floors that barely meet deflection minimums.
Unfortunately, that seems to be a trend!!
I have seen some really well laid floors (in terms of layout, flatness, etc) that failed because of brutal preparation work.

I have used 1/2" concrete board - set in thinset and screwed, for many years with no failures - however, let me just say, 95% of my work is bathrooms. I like the features of Ditra but will be more aware to look at the existing substrate.

A couple of jobs where I did use ditra, the subfloor was OSB so I installed 3/8 plywood over, then ditra. I am thinking this may be the way to do all floors, even 5/8" ply. Any thoughts??

P.S, - Bud mentioned about too much/too little thinset under the ditra - I have used both the Ditra and Kerdi trowels from Schluter - and find them both excellent - perfect coverage and they are really nice trowels (made by Rubi)
 
P
#15 ·
R&D Tile said:
I will never use a cbu on a floor again, unless a very small area or where I need the height in a small area.

Ditra is all I'll use.

The only thing about all of this is getting a FLAT and LEVEL floor, if it isn't, I'll mud it, still the best method.:)
Click to expand...
Schluter has that covered too! Check out the Ditra XL. You can also double layer Ditra if you want to, but that would be too expensive unless it was a powder room or something.
 
Save
Reply Quote Like Like
M
#17 ·
I know the brass selection of Rondec series edge profiles are delightful and enduring.
Again, for the Ditra, I've yet to meet a tile setter that has demolished any tile installations prior 90s that had the plastic orange underlayment underneath their ceramic/stone. Therefore, I don't know the actual duration of the material. For all I know, the 2020 T&A publications may even recommend NOT using it. Heck, take the coveted "green board" recommendations by the TCNA for instance in bathroom wall installations. One year it's ok, a few years later it's nixed?
 
Save
Reply Quote Like Like
J
#39 · (Edited)
Exterior decks and Ditra Failure (Canadian Installations)

Have you men read this thread on John Bridges site?

http://www.johnbridge.com/vbulletin/showthread.php?t=83568

I have not been able to shake this new training I received at Mapei and the story of the Whistler Builder who ripped out all the Ditra from his exterior deck because he "Hates" it and does not think it is suited for exterior use in our Canadian Climate.

Only one poster touched on what I think the root problem can be and that is the little dovetails holding water and the freeze thaw cycles expanding and pulling on the Kerdi Seams.

You will notice as well that the Ditra is layed across the slope creating little dams so the water will be held up every 3 feet...

My deck is still getting soaked. I Hydro Banned it till Spring time and think I'm going to try Nobel Deck as my Primary waterproofing material...

Now to get it approved for use in Canada.
 
Contractor Talk - Professional Construction and Remodeling Forum
posts
3.6M
members
169K
Since
2003
A forum community dedicated to professional construction and remodeling contractors. Come join the discussion about the industry, trades, safety, projects, finishing, tools, machinery, styles, scales, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
General Discussion Tools & Equipment Business Painting & Finish Work Decks & Fencing