Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
3,265 Posts
1/2" would be 3584 pounds. 3/8 is 3136 pounds.
 

·
Metal Stud Framer
Joined
·
180 Posts
Here in Hawaii one would get .25-.35 a square foot to hang and .35-.40 to finish. I'd charge anywhere from .85 to $1.00 just for the labor but I'm thousands of miles away from you.....
 

·
Registered
Joined
·
78 Posts
Zendik said:
Here in Hawaii one would get .25-.35 a square foot to hang and .35-.40 to finish. I'd charge anywhere from .85 to $1.00 just for the labor but I'm thousands of miles away from you.....
Then your only looking at about $2200 for the whole job. To hang and finnish 70 sheets of drywall unless that can be done in 3 or 4 days seems low. Unless I'm misunderstanding how your bidding these jobs.
 

·
Registered
Joined
·
17 Posts
should tk 52 sheets 4 by12, which is what should be used. Because its a limited footage job 25 cents to hang and 60cents to finish plus the cost of the board. 52 because of 10 to15% scrap
 

·
Registered
Joined
·
10,471 Posts
I'm getting $1.10. That is mostly because of hurricane damage.
 
1 - 10 of 10 Posts
Top