Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter #1 (Edited)
I have a AEPF4260 variable spd unit.
The low Voltage wiring coming out taped says to go to condenser.label R,Y,C
the other harnas says to thermostat R,C,Y1, y/y2,G

I have a single stage thermostat ,standard condenser 2 wire contactor.
what to do to wire the condenser ?

this is my first goodman variable spd, and the owner called to say condenser wont shut down. Rheems comfort control setup has multi wires on condenser.
But this condenser is a basic seystem.
 

·
Registered
Joined
·
102 Posts
Discussion Starter #3
I resolved the problem. When it was 130* in the attic and the end of the day ,I goofed.

they have some 12 wires comeing out of the A/H.
 
1 - 3 of 3 Posts
Top