Contractor Talk - Professional Construction and Remodeling Forum banner


1835 Views 5 Replies 5 Participants Last post by  Jeremy E
I came across Bass' old "table saw millwork" thread with this picture.

It got me wondering about something I've never given a thought to before. Why the "relief cuts" on the backside of mouldings?

Please learn me up on this one. Thanks.



See less See more
1 - 2 of 6 Posts
Because trim is mostly covering imperfect
joints between dis-similar materials,
that usually are not in perfect plane. :thumbsup:
A little slice of genius. Very well put:thumbsup:.

Good answers all. Thanks.

See less See more
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.