[Roofs R Us]

I,m doing a job for a guy and he wants me to get him new 6inch gutters.What do the gutter contractors charge for that? Contractor price?

 

[loneframer]

I'll guess that the average reply for this question will be in the area of TREE-FIDDY.:thumbsup:

 

[hungry4knowhow]

man I've been itching to bid tree-fiddy since before I registered and was just reading here....I always get beat.

Im close this time though! Tree-Foudy-Niner

 

[outlaw]

I'll see your tree-fiddy and raise you a double duece.

 

[loneframer]

man I've been itching to bid tree-fiddy since before I registered and was just reading here....I always get beat.

Im close this time though! Tree-Foudy-Niner

I sell myself on quick, efficient service.:thumbsup:

 

[J F]

This thing's gonna get worn out...:w00t:

 

[JonM]

I'll guess that the average reply for this question will be in the area of TREE-FIDDY.:thumbsup:

Copper or PVC?...:thumbup:

 

[Ed the Roofer]

Seamless or fabricated on a brake?

OGEE or 1/2 Round?

Trough only or with a flange?

Aluminum, Galvanized or Copper?

1,2 or 3 story install?

Bushes and trees in the way or free access?

Fascia mounted or Hanging Style?

Warranty or tail light?

On flat roof or sloped roof?

Soldered or caulked?

Hang Tite's or standard?

Straight runs or Inside and outside miters or curved application?





Yeah, given all of the information you provided, I would say about TREE-FIDDY.:thumbsup:



Ed

 

[Century Man]

Seamless or fabricated on a brake?

OGEE or 1/2 Round?

Trough only or with a flange?

Aluminum, Galvanized or Copper?

1,2 or 3 story install?

Bushes and trees in the way or free access?

Fascia mounted or Hanging Style?

Warranty or tail light?

On flat roof or sloped roof?

Soldered or caulked?

Hang Tite's or standard?

Straight runs or Inside and outside miters or curved application?





Yeah, given all of the information you provided, I would say about TREE-FIDDY.:thumbsup:



Ed

Ed, after all the research you have done over the years and you change your pricing model based on information you've garnered from contractor forums. I'm shocked! But that price does sound about right for a national average.

 

[MJW]

I'll do it for half.

 

[Copper Nerd]

Copper 6" K 16 oz. starting at $6/ft
.032 Kynar 6" K starts at $4.50/ft
24 gs Kynar 6" K starts at $3.80/ft

 

[Ed the Roofer]

Copper 6" K 16 oz. starting at $6/ft
.032 Kynar 6" K starts at $4.50/ft
24 gs Kynar 6" K starts at $3.80/ft

Do you travel to the NW suburbs?

Also, what about Classic or Berger 1/2 Rounds?

Send me a message, either PM or e-mail through my website please.

Ed

 

[J F]

Time for some schoolin' by edster....:laughing:

 

[Grumpy]

Copper Nerd any galvanized or copper work I'd be happy to send your way. Contact me via my website or PM.

 

[Celtic]

I'll do it for half.

I'll do it for the other half :w00t:

 

[WarnerConstInc.]

You want to drive to northeast Indiana while you are at it? I need some copper on my house.

 

[Jayrek]

Copper 6" K 16 oz. starting at $6/ft
.032 Kynar 6" K starts at $4.50/ft
24 gs Kynar 6" K starts at $3.80/ft

$6 for copper a foot?

Yeah, 500 lb roll, material only. No downspouts, no ends, no miters, no install, no rollforming. Hang 16oz in snow country and lets see what it looks like in 5 years.

Can you lower the 24 guage to tree fitty a foot?

 

[wallmaxx]

Nathan

Can we get a [Tree Fiddy] button like the [thank you] button?

And

Can we also have a [Please Make It Stop] button?

Or maybe a [Happy Place] button