[brhokel606]

Pic 3

 

[brhokel606]

Pic 4

 

[brhokel606]

Pic 5

 

[brhokel606]

Last one

 

[Snickare85]

nice..everything in order!

 

[carzie]

Ordered a 6x10 v-nose and should have it in a few weeks. Not packing nearly half the tools as most of you guys. I've just gotten tired of swapping my painting and papering stuff back and forth from my truck and shop. Takes close to 45 minutes to do it each way, bonus being I will have more room in my shop:thumbsup:

 

[mako1]

Pic 3

Very nice.All of them.I wish I could keep things that organized and good looking but my crew says different.Evn when I'm on my own it' not that nice just to be honest.

 

[TNTRenovate]

 

[carzie]

Good lookin rig TNT, the sticks and brooms are a nice location...you need a few more tape measures tho

 

[TNTRenovate]

Good lookin rig TNT, the sticks and brooms are a nice location...you need a few more tape measures tho

I get that every time these pics are posted. Tape measures are like socks...they disappear until you pull out the washer and dryer out from the wall or pull the drums. When I cleaned out my van I found like 8 tape measures. I am back down to 4 in the back. Time to clean it out again.

 

[mako1]

Nice clean rig TnT,I always liked the cord reels but never found any that worked well for me.Do you have a suggestion on those.I daisy chain mine but it confuses the help.They never can remember which end to start at .

 

[roofing4ever]

I use a garage

 

[mako1]

You're going to start off here with your first post being a smart aZZ answer.Good luck!

 

[BradingCon]

Where do you keep the miter saw and table saw rob? Did I miss them or do you only take them if you think you will need them?

 

[TNTRenovate]

Nice clean rig TnT,I always liked the cord reels but never found any that worked well for me.Do you have a suggestion on those.I daisy chain mine but it confuses the help.They never can remember which end to start at .

I picked up the cord reels at HD. Have to replace them after a few years of use. I need them nice and neat and daisy chaining just takes up too much room and I have the same problem, no one knows how they go back together. I just roll them up on starting with the receptacle end, easy for everyone to remember.

 

[mako1]

I'll have to check out the depot.Used to have some that had rail a accrosed them with a winder thingy on it that would layer them on the real for lack of a better term.
Can't seem to find those anymore.

 

[Dave in Pa]

I am BAD!! Tried many things, nothing works for me! Get it in the truck/doors close/ on the way home for the night!! To many jobs, to many places to be to do that clutter free stuff for me?

 

[fjn]

A shop at home,steel shipping containers referred to as a conex on the job site.

 

[FrankSmith]

Nice clean rig TnT,I always liked the cord reels but never found any that worked well for me.Do you have a suggestion on those.I daisy chain mine but it confuses the help.They never can remember which end to start at .

I was looking for some a while back with no luck finding anything that I thought I wouldn't destroy in a few months. Then I started looking at reels intended for garden hoses and found there where lots of options.

 

[TaylorMadeAB]

I am BAD!! Tried many things, nothing works for me! Get it in the truck/doors close/ on the way home for the night!! To many jobs, to many places to be to do that clutter free stuff for me?

Does anyone else find that jobs only ever end at 6 or 7 at night? I don't think I've ever finished a job at 2 and had the afternoon to tidy up they trailer, write the invoice, etc.