Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 10 of 10 Posts

·
Super Moderator
Joined
·
11,331 Posts

·
Registered
Joined
·
4,665 Posts
Thick nap roller, thinned out mud. May be a little tough to match on a patch. I would suggest a 4'x4' test pc of drywall or plywood to experiment on until you get the proper mix/roller technique down.:thumbsup:

Good luck
 

·
Registered
Joined
·
1,768 Posts
I always used one of those gold colored textured roller skins and I mixed my mud with a half gallon of water to a 5 then I would press on the roller and push the mud:thumbsup:
 

·
Registered
Joined
·
1,245 Posts
Discussion Starter · #10 ·
The small patch went ok. The larger patch really started to grow and is about 4*8 right now so I ordered a roller. Thanks guys!
 
1 - 10 of 10 Posts
Top