Joined
·
8,819 Posts
TBA Meeting 2 (Tool Buyers Anonymous)
4281 - 4300 of 4437 Posts
Joined
·
8,819 Posts
We ran this gun for a couple months. We typically install 1 3/4" X 7/16" 16 gauge staples.Some of us use MAX tools. There is an "identical" manufacturer out that is made in Korea.
Our vendor let us use the stapler. It is a reasonable comparison.
JiTool.
English site: JITOOL USA CORP-HOME."JITOOL"
Korean site: 제일타카 | Homepage![]()
![]()
![]()
![]()
Sent from my SM-N950U using Tapatalk
The compressor regulator is set at 130 PSI with around 200-300 ft. hose to the gun.
This gun was ok. It is not as nice as the MAX.
It left fasteners proud at times, even when we backed the nose tip to 0. At 0 we then had firing issues being the safety depress portion wouldn't always engage.
I like that it's Korean, particularly when Taiwan gets invaded and we have tool shortages.
But overall, just a basic gun.
Sent from my SM-N950U using Tapatalk
Cross cuts are a the problem but the few rips I did, yes
The bigger battery handled it but also took the life out it.
Joined
·
8,819 Posts
Joined
·
2,917 Posts
I think this counts as a tool as it will store tools.
Needs some paint but it’s bone dry inside
![Sky Cloud Wheel Tire Land vehicle]()
Needs some paint but it’s bone dry inside
Joined
·
2,917 Posts
Joined
·
14,400 Posts
You need more tools.
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
Joined
·
2,917 Posts
Of course I do but unfortunately I had kids and they are expensive
Probably. At least they're both red, that might help
Sent from my SM-G973U using Tapatalk
Joined
·
8,223 Posts
Buy the charger and two batteries ($200), get a tool for free ($129).
![Motor vehicle Automotive tire Automotive exterior Bumper Gas]()
I went in for the sander, nice young lady asked if I knew about the promotion, I said no and she hooked me up.
She also wanted to get an opinion on a possible new Milwaukee product.
Would you guys buy a packout that was an M18 portable refrigerator?
I told her I would probably not, there are some guys that would if it works right.
Mini survey, anyone on-board for an M18 mini fridge?
I went in for the sander, nice young lady asked if I knew about the promotion, I said no and she hooked me up.
She also wanted to get an opinion on a possible new Milwaukee product.
Would you guys buy a packout that was an M18 portable refrigerator?
I told her I would probably not, there are some guys that would if it works right.
Mini survey, anyone on-board for an M18 mini fridge?
Joined
·
5,878 Posts
Been thinking about this Makita 36v cooler. I would consider a packout fridge.
18V X2 LXT Cooler Warmer 12V 24V DC Auto and AC Tool Only DCW180Z from MAKITA - Acme Tools
18V X2 LXT Cooler Warmer 12V 24V DC Auto and AC Tool Only - DCW180Z from MAKITA
www.acmetools.com
I won't buy from a chinese tool company anymore.. they can keep their mini fridge.
I haven't gone red, so maybe that influences my opinion. I work out of a van. It has a couple of cigarette lighter plugs, and I use those for gizmos like that. Don't think I'd want to haul my fridge up onto the top plate anyway.
Joined
·
303 Posts
Nobody seems to care/doesn't know...
Almost went for an M18 stapler but going with the DeWalt instead entirely for this reason.
Sent from my Pixel 4a using Tapatalk
At least go with a company that's from a country that's a friendly ally of the US. Maybe it's just me???
Joined
·
1,932 Posts
Everything is from China. I gave up years ago. Call me what you will
Joined
·
14,400 Posts
I'd buy a fridge.
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
4281 - 4300 of 4437 Posts
Join the discussion
