Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Hey guys,

When(and if) a system is low on refrigerant, the suction line will start to freeze up near the compressor(if i remember right), this apparently will be reflected by a high superheat measurement.
D.
Although the suction line is seen freezing at the compressor. the start of it is normally at the beginning of the evap. It starts freezing there and works its way back to the comp
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top