Contractor Talk - Professional Construction and Remodeling Forum banner

stonelok e3/2k qhestion

3485 Views 0 Replies 1 Participant Last post by  Bazooka Joe
Hi folks,
The directions read that these products can be applied w/ a short nap roller or spray gun. Do any of you have any experience applying these with a roller? I know that its a much thinner product than epoxy, ...just wondering if it self levels enough to be able to pull that off.
thanks alot,
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.