Contractor Talk - Professional Construction and Remodeling Forum banner

Stone Peak Ceramics

5055 Views 7 Replies 6 Participants Last post by  ee3
Anyone have any experience with Stone Peak porcelain tile? I'm looking for Made in USA tile for my porch and they are what my local tile store sells. I'm currently leaning towards their "Fossil" collection. Anyone have anything good or bad to say about them? Thanks
1 - 8 of 8 Posts
Haven't heard of them, that doesn't mean anything. Dal-Tile built a few plants in the US Of AMERICA. Good for you, use porcelain if water can get on it and freeze in winter.
  • Like
Reactions: J.C.
No experience with them but I do sell/install quite a bit of Daltile made in USA.

Did my exterior porch with some:


http://products.daltile.com/series.cfm?series=260&item=4023&
  • Like
Reactions: J.C.
I think years ago the Crossville plant was the only plant in the US producing porcelain.
  • Like
Reactions: J.C.
Most of the US-made tile (porcelain) I install from Daltile is made in Muskogee, OK.
I'm using Stone Peak on a job right now. Don't really have anything good or bad to say. 12 X 24's are pretty flat with only a slight downturn on the ends.

Attachments

I thought I checked Daltile and they didn't have a distributor around here but now I see they have 2 locations that are a little over an hour from here. I think I'm going to try the stonepeak tile for my porch but will have to check out the Daltile store for a couple other things I want to do.
Stone peak is a good Company, out of Crossville TN. ,right across the street from Crossville Tile.They are members of the TCNA.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top