Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 15 of 15 Posts

·
GC/carpenter
GC/Carpenter
Joined
·
43,277 Posts
Discussion Starter · #1 ·
Need to install a center grab bar for steps that are about 6' wide. The owners want a bar up the center. Does anyone have a company for this? I would like it to be Stainless without infill, just a bar that has an upright at the bottom and top and the grab to be between 34 and 38 inches in height. Also it will probably be attached with pour stone, because the top and bottom are cement embedded pavers.
 

·
GC/carpenter
GC/Carpenter
Joined
·
43,277 Posts
Discussion Starter · #3 ·
RobertCDF said:
Know a good welder that can do SS?
I don't, to be honest I've never done this kind of grab, I've always put them on a wall.
 

·
GC/carpenter
GC/Carpenter
Joined
·
43,277 Posts
Discussion Starter · #4 ·
I've been trying to google my area but I will google SS welders thanks for the tip
 

·
Super Moderator
Joined
·
24,693 Posts
Any fabrication shop should be able to bend SS tube to your spec & weld some flanges for attachment.
 

·
GC/carpenter
GC/Carpenter
Joined
·
43,277 Posts
Discussion Starter · #10 ·
CarpenterSFO said:
I'd talk to a pool contractor - they do those all the time, and must have regular suppliers.
Great idea! It's probably very common with those guys.
 
1 - 15 of 15 Posts
Top