Contractor Talk - Professional Construction and Remodeling Forum banner

Stand - Off for B vent

1520 Views 1 Reply 2 Participants Last post by  flashheatingand
Need to go up about 3 ft on this vent.

How best to do a stand off from the rake board ? Type of material ?


See less See more
1 - 2 of 2 Posts
I would use some s-lock,2-3" lip-out on both ends to drive a screw or two on each side. Wish I knew how to draw it out and post, but, it's quite simple.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.