Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 6 Posts

· DPDT, Momentarily on
1,052 Posts
In my experience on smaller jobs like a single fam. home it's about 33.3/33.3/33.3 split between the GC getting it done by whoever he can find, or the concrete guys setting them wet, or the erector setting them. Whenever I get stuck setting anchors I'll usually stand a column set the anchors and move on till the columns are set. On larger projects set it wet is the only way to go, and code in most cases.

As far as Hilti drills go you can't go wrong. But I have to ask what size holes are you drilling? That's way more drill than you need for 99 out of 100 anchor jobs. A quality sds or spline drive hammer drill, even a Hilti, will be tons cheaper and way easier to run than that core drill set up.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.