Contractor Talk - Professional Construction and Remodeling Forum banner

sealing seams in laminate tops

88306 Views 13 Replies 10 Participants Last post by  mike d.
what do you guys use to seal the seam in laminate counter tops? The horizontal seams where sheets come together are what I am concerned about...even the 45 degree cuts where joining off the shelf mitered postformed tops.
1 - 2 of 14 Posts
good point on seam placement. I'm switching to using ply for the base material after redoing my countertop made of plywood and seeing how good the condition was at the seams. I've installed postformed miters and the supplied glue (w/ bolts) indicates it keeps out water...not sure how that would work at the to of the seam unless perfect.

would you mind posting a picture of your jig?
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.