Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 14 Posts

· Registered
3,464 Posts
One other question, is stainless worth using instead of aluminum?. I figure aluminum would be much easier to cut, besides being cheaper.

Yes I would stay with the aluminum if you can. Just cut them on your regular miter saw.

I have used some of the stainless profiles and they are definetly more of a pita to work with than the aluminum.

1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.