Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
124 Posts
Refinishing Wood Floors

Bottom Line: Tree Fiddy .

Don't sand with anything higher than 100 grit , the stain will take better. Vacuum & tack the floor very well with a clean cotton rag with a little mineral spirts.Let the stain dry overnight without any traffic.


But make them pay for all stain & poly . Use a Minwax water-based clear-coat instead of traditional poly. You can apply 3 coats in one day instead of 2~3 days.


Read the instructions on the water-based clear carefully , wait the required time between coats.

Collect your check and buy a hooker.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top