Joined
·
3,658 Posts
Not Radiance/ TT product but I did conect ipe 5/4 to a composite 12'' round colomn with a jig saw and a pattern for the cut. It involved a 3'' shop made plug I drilled thru taped the plug in clear into the hollow colomn with tightbond 111 pluged the holes with a standared ipe plug.
I held the damm things tight with a band clamp,like the ones the Bone uses, and it was a real Pain!! Not any real movement down the road the long plugs were at somewhat of a 90 into the colomns.
I cant see any hardware working for your thing unless you had it custom made but you could use a plug or something like it and cover the hole with one of those pound in composite plugs that seem to work ok. J.
I held the damm things tight with a band clamp,like the ones the Bone uses, and it was a real Pain!! Not any real movement down the road the long plugs were at somewhat of a 90 into the colomns.
I cant see any hardware working for your thing unless you had it custom made but you could use a plug or something like it and cover the hole with one of those pound in composite plugs that seem to work ok. J.
