Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
We use the high vibrating screeds made by allen. As far as your question about bringing the air out the top, i would have to disagree with that. The air is entrained in the concrete. You will bring the cement/cream up to the top and more bleed water than you will with a hand rod. I don't see any problem using the magic screeds if that's your worry. For outdoor pours you should be about 6%air.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top