Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 10 of 10 Posts

49 Posts
Discussion Starter · #9 ·
Thanks for all the positive reply's guys!

Yes I did fabricate the columns myself, ripped down the panels from sheets of 3/8 azek. All corners are 45'd, glued and pinned, then filled and sanded afterwards. The capitals are a 4 piece and the base a standard 2.

The porch is rather large, the addition was only about a 1,000 sq. ft. but blends really well when looking at it on site.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.