Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 5 of 5 Posts

·
Mobile Sandblasting
Joined
·
672 Posts
Discussion Starter · #3 · (Edited)
My gauge is showing a consistent 70psi after about 1min of continues blasting. I'm running electric deadman so that helps. The 185 is running full speed while blasting. It's nice to stop blasting for a few seconds and let the pressure build up and then hit it. I'm in the market for a used 375cfm if you know of one. Swimming pool Property Rectangle Concrete Composite material


Asphalt Water Roof Road


Last one was before it was drained.
 

·
Registered
Joined
·
1,255 Posts
You probably had around 50 psi at the nozzle then, depending on how much hose you had on your compressor and blast pot. And of course size of hose too. 3/4" air hose and 1" or 1 1/4" blast hose. That little compressor was huffing.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top