Contractor Talk - Professional Construction and Remodeling Forum banner

pocket door panic

1754 Views 4 Replies 2 Participants Last post by  Kenny B
Hey guys,
I frequent this forum, usually in the flooring section as that is my profession. The wife has me renovating our kitchen and installing a pocket door in a wall that Im putting up which is barely long enough for the rough opening. Im talking about just a few extra inches. I have installed pocket doors in three other locations in the house with out much trouble but for some reason this one is fighting me. I think I screwed up the rough opening. My question is do I HAVE to have a proper header for the pocket door or can I just span the gap with the bracket? Its a 36" door with a 72 and change opening which I will have to make bigger if I HAVE to put a header in. Thanks guys!
1 - 3 of 5 Posts
It's actually just for a wall I'm putting up around the washing machine
Thanks Warren, I appreciate the input.
1 - 3 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top