Contractor Talk - Professional Construction and Remodeling Forum banner

pine trim

2828 Views 18 Replies 10 Participants Last post by  dtsinc
Here in Montana, we use a lot of pine trim. Several years ago I started using pocket screws for all the miter joints, to keep things nice and tight.
Have any of you had any experience using a corrugated stapler? I recently toured a facility that was using them looks like a really fast way to hold things together.
Thoughts or suggestions?
1 - 1 of 19 Posts
They're a little more prone to splitting out than nails or screws if you have to remove trim.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.