Contractor Talk - Professional Construction and Remodeling Forum banner

paslode finish nailer depth adjustment

6808 Views 1 Reply 2 Participants Last post by  mics_54
I have an old (Black IM250) paslode finish nailer. Is it possible to adjust the drive depth? If so how do you do it? I had the manual at one time, but it is long gone. Thanks for any help.
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.