Joined
·
8,882 Posts
Zero entry floor framing
Start of the office
6" 18 gauge fire wall
3 layers of 5/8" type x per side
Last layer we used Denshield
Trusses set & bonus sub floor down today. Roof deck tomorrow.
Office/Warehouse Project
1 - 6 of 6 Posts
Zero entry floor framing
Start of the office
6" 18 gauge fire wall
3 layers of 5/8" type x per side
Last layer we used Denshield
Trusses set & bonus sub floor down today. Roof deck tomorrow.
Joined
·
18,337 Posts
Feels like I have seen this pictures some where before? Hmmmm.....
Still playing with sticks! Nice job! Jealous!
Still playing with sticks! Nice job! Jealous!
Joined
·
8,882 Posts
Warehouse has 12000 sq ft with 20' ceilings. Office has 2000 sq ft. We are the technical general of the whole project. There is a separate crew doing the warehouse shell. They can burn through some material!
The office is our baby through the end.
The office is our baby through the end.
Joined
·
8,882 Posts
Framing is all punched out. Ready for inspection.
![Building Barn Room Beam Stable]()
![Ceiling Light Architecture Line Daylighting]()
We changed how we do 2x6 headers last year. The 2ply 2x12 header is held flush to the exterior. Then we use 1-1/2" xps and osb as the last layer. Gives plenty of area for drywall and trim to be attached and gives us some r value in our headers.
We changed how we do 2x6 headers last year. The 2ply 2x12 header is held flush to the exterior. Then we use 1-1/2" xps and osb as the last layer. Gives plenty of area for drywall and trim to be attached and gives us some r value in our headers.
1 - 6 of 6 Posts
