Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
No-bore Hinge or smaller cup depth needed for 1/2" overlay face frame cabinets

I'm remodeling my wife's kitchen, and repainting our current doors.

Because of the complicated profile (see photo), the standard 35mm hinge does not appear that it will work. The faceframe is 3/4" thick and the doors are a 1/2" overlay.

Any suggestions for a good hinge to use? I'm thinking of something with a smaller cup depth.

I bought something like this, but with the 3/4" face frame, there's just not enough support without adding some buildup structure.

https://www.dropbox.com/s/xu27z2e575zud0g/photo.JPG
 
1 - 1 of 1 Posts
Top