Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 20 of 24 Posts

· Registered
Joined
·
16,795 Posts
The only bit of that system that concerns me is the 3/4 pipe that supplys the pumps. I would have thought that would have needed to be at least 2". If all them pumps run at one time that 3/4 would be seriouslly undersized. Even if only 2 or 3 of them run it would. Does the system only allow a set amount of pumps to run at a time. I have never run a manifold like that with primary flow and returns so small!!
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top