Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
i like to know if a paiter from california can let me know how much is square feet in the golden state for interior or exterior painting i have to present estimate next wednesday i need some help. thank you brothers :Thumbs:
 

·
Registered
Joined
·
18 Posts
"...how much is square feet..."

Length "times" width = Sq ft
Perimeter "times" Height = Sq ft

For gamble ends or basic triangles:
Base "times" Height "divided by" 2 = Sq Ft of Triangle
or
H x 1/2B = Sq ft of triangle x 2 for both halves of triangle.

Note: Instead of dividing by two, just run the number and it will equal the SQ Footage of both Gamble ends of the house / building. (or from Eve to ridge twice for just one side of the building. Remember...there are TWO triangles on each end of the house / building...

I'm really sure this wasn't the answer you were looking for, but it IS how you worded your post....I couldn't resist....;)

Best of Luck,

-Martin :)
 
1 - 2 of 2 Posts
Top