Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter · #1 · (Edited)
What do most of you guys do? Ive always wrapped the house using felt then put the windows. Flashing the windows on top of the house wrap. Also saw guys put the windows and window flashing right to the plywood then put the house wrap on around the windows. I like doing it before so I can wrap the house wrap into the jambs of the windows.
 

·
Registered
Joined
·
88 Posts
Discussion Starter · #3 ·
Thanks for the info. I usually cut the felt at the top on a angle then tape it up out of the way. Then flash the top and then fold the paper back down and tape the angle cut in the felt..
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top