Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 5 Posts

· Registered
10 Posts
quick and dirty

I built a shed 8x16 and have about 26 receptacles in it without wiring any of it.

I used two power strips one 12 receptacle one with 10.
The larger one has a long plug on it that reaches the gfi that is on the house and I pluged the 10 into the 12.

Both strips have builtin breakers and the gfi protects everything. If I were to wire the shed for anything other than this I would put in 220vac. otherwise this serves all my needs.
As it is protected by three breakers I am confortable with it and it is inexpensive to install.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.