Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
288 Posts
Discussion Starter · #1 ·
Finishing up a deck and customer wants us to refinish some high end patio furniture.
Problem I have is what to do with the Oak slates in the chairs. Customer said they used an oil base deck stain before. She wants it a walnut color. Because of the new VOC’s requirement I have not had much luck with the new oil stains drying. Even tried some Armstrong Clark deck stain on a new project. After a week the color would still rub off on your hands.

Any recommendations beside teak oil over the oak. Already done the prep and have it sanded down to new wood.

Its outdoor furniture but under a covered patio.

Thanks
 
1 - 1 of 1 Posts
Top