Contractor Talk - Professional Construction and Remodeling Forum banner
Status
Not open for further replies.

Need advice - wall squat rack on metal studs. Is bracing required?

2K views 14 replies 10 participants last post by  Tinstaafl 
You can put a couple of sticks of unistrut.

You can attach the ends above the ceiling to the floor...

We would attach the strut to the stud with toggles. Then put a swing arm mount with a 50" plasma screen. ( that's when clients didn't want open the walls) had contractors put strut in the wall before as well.

Plasma screen was about 120# and the swing arm mount was around 85# and would come off the wall at 3'.

Plywood will work as well. 20 gauge studs?
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top