Contractor Talk - Professional Construction and Remodeling Forum banner

need a drawing in florida

1692 Views 1 Reply 2 Participants Last post by  Bob Kovacs
hey guys need some one that can draft me up a drawing where i can take it to the engineer to get a stamp so i can get a permit...
what i need is a drawing of 12x36' aluminum open porch with a 10x10 '
room i have all the spects but it has to be done so an engineer will stamp it... that's florida for you live here in witer haven, fl. any help
thanks Terry [email protected]
1 - 2 of 2 Posts
Wouldn't it be easier to just have the engineer draw it himself?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.