Contractor Talk - Professional Construction and Remodeling Forum banner

Muro Auto Feed Drivers? Anyone?

2292 5
Does anyone have any first hand use or knowledge of these tools?

I am looking at the Ultra driver of the Speed driver.

http://www.muro.com/tools.htm

1 - 6 of 6 Posts
i liked watching the second screw smoking.
I have one it works great.the rep to talk to is bonnie
Cole said:
Does anyone have any first hand use or knowledge of these tools?

I am looking at the Ultra driver of the Speed driver.

http://www.muro.com/tools.htm

<a href="http://www.youtube.com/watch?v=1dYX4F3YTKE">YouTube Link</a>
Might work great for sub floor, but with all the hidden fastener options for decks these days those tools are becoming obsolete, for me.
Oh I agree. I want to use it to install 2x2 shade bars on top of our pergolas. Would speed things up and keep from having to lean over all the time.
Might work great for sub floor, but with all the hidden fastener options for decks these days those tools are becoming obsolete, for me.
looked into them at one time, my concern was readily accessible fasteners. I didn't want to order them every time I needed them, so I went with the Simpson Quik Drive, where my lumberyard stocks the screws. This was back when we were still face screwing composite decking. The Muro does seem to be a better quality gun then most.
Cole said:
Oh I agree. I want to use it to install 2x2 shade bars on top of our pergolas. Would speed things up and keep from having to lean over all the time.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top