Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
All -

Do any of you have any experience in working on removing aluminum interlocking roof tile? Got a remodeling job to add a dormer to a house w/ existing metal tile roof. Plan is to remove the tiles, once framing is done, reuse the tiles to re-tile the area connecting to the siding. It is about a 8x12 dormer. Any advice on handling the job will be appreciated.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
Thanks both. Yes.. the "tile" could be misleading. According to the owner, it was done by a company that use the Interlock system. Attached are couple of pictures of the roof. Does putting the "tile" back be much more complicated than removing back, esp in this case they will be put back around the dormer. Trying to figure out the budget for the job. If I am sub this out.. how much I should expect from my sub? I got one quote and it is in the 10k range. That doesn't seem right.
 

Attachments

1 - 2 of 2 Posts
Top