Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Thom
Joined
·
4,137 Posts
I think the doors are goners. Any sanding will result in an uneven wood texture on the doors. Replace the doors and do better next time.

I use those same doors and spray them. I put up the plastic with a 1X2 on the wall at the right height to catch the top of the door. I put 2X4's on the floor to hold the door off the floor. After painting both sides in the "paint booth" I carry them over to the drying area, with a finger in the door knob hole and another on a hinge mortise (that's a real ***** on the 1-3/4" solid core doors so I do them first).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top