Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
It's for my whole house fan. Needs to be able to handle a 1/3 hp 6/10 amp rated motor. I've exhausted my search but you guys are good!

3 speeds(low, med, high) with a timer switch.
 

·
I own stock in FotoMat!
Joined
·
13,056 Posts
Why not two switches? Timer feeds speed control.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #4 ·
OK, where can I get a 3 speed selector at? Preferable a knob with, Off, High, Med, Low. I can't even find one of those that will work.
 

·
Registered
Joined
·
155 Posts
480, that P&S control won't work on a whole house fan. :no: Those are designed for paddle fans. :blink:

About the only thing that I could readily find on the web is here. You'll have to inquire about suitability for your project. :whistling
 

·
I own stock in FotoMat!
Joined
·
13,056 Posts
480, that P&S control won't work on a whole house fan. :no: Those are designed for paddle fans. :blink:.......
A motor is a motor is a motor. As long as it's within the HP rating, it should work.
 
1 - 7 of 7 Posts
Top