Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Jeff
Joined
·
1,485 Posts
Ive seen some set up blocks before but never tried them. Couldnt you just take a bored sat afternoon in the depths of winter and make some pieces the size you need. Run a couple different thicknesses through and get em fit just right then label them for the next time you use that thickness. Just pull out the pattern that fit and adjust the bit and fence to that piece. I have very little experience with these so correct me if my thinking is skewed.
 
1 - 1 of 1 Posts
Top