Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,425 Posts
Now many doors are you doing? Dont make it more complicated than it has to be. Use a piece of 1/4" luan, make a template, clamp to each door. As far as the depth, most fosner bits, which is what you need are just about the correct thickness to to allow for the hinge to sit flush. Eyeball it carefully, when the back of the bit is flush with the back of the door, your good, confirm this of coarse. GMOD
 
1 - 1 of 1 Posts
Top