Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
142 Posts
primarys you basically have to look at,cut hole in plenum and inspect.or if rollout switch tripped its a good indication of trouble..now secondary x changers can pretty accurately be diagnosed by inserting co probe in exhaust vent outside,anything over 100 ppm i'd be pulling vestibule plate off for a closer inspection ..
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top