Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,920 Posts
How often do you use the combustion analysis gear?

If I am to do an official inspection of the h.e., I would at least pull the blower and/or open the evaporator coil. Since I have a sea snake, and an impact drill, I will pull out the burner assembly as well. The s.s. is an investment, but it's worthwhile.

I you want to keep it simple, you can pull out the limit switch and use the sea snake there, and take a peak through the burner ports, but I wouldn't declare that as an official inspection of the he.
 

·
Registered
Joined
·
3,920 Posts
My supply house has a kit which they want to get rid of. They offered me a good price, but at this time I can't pull the trigger. None of the outfits I used to work at ever used them or hadone for that matter. I certainly wasn't ready to shell out my money. However, now it's Flash time. Do you think they are a "must have" tool?. I primarily work on nat gas and electric equipment.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top