Contractor Talk - Professional Construction and Remodeling Forum banner

How to lower a built in desk....Undercut?

2K views 5 replies 6 participants last post by  Leo G 
#1 ·
So I am building a custom built in desk for my uncle. Its out of 3/4 oak ply. I Glued and nailed it together in place and then slid it up against the wall where I screwed it to the wall. He now wants to lower the desk 2 inches..... Because of how its sits I have to cut 2 inches off the bottom then take the crews out and lower it to the floor. So how is the best way to do this?
 

Attachments

See less See more
1
#3 ·
Trade finish carpentry and you asking how to lower a desk 2"...?
Please tell me you trying to introduce yourself with a joke, because I know it's not April Fools day yet :laughing:

But in case this is not a joke, raise the floor 2" and you will be OK.
 
#6 ·
Ding ding ding. Desks are usually at 30" I made mine 34"
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top