Contractor Talk - Professional Construction and Remodeling Forum banner

1 - 5 of 5 Posts

·
Working
Joined
·
4,127 Posts
Discussion Starter · #1 ·
What hinge guide/jig are you guys useing? I would really like a full length one that does all 3 hinges at once. Today was 6 doors and jams routered with a single hinge jig. That is 36 measures and 36 fixture moves. That is really slowing me down.

Cole
 

·
Registered
Joined
·
3,005 Posts
What hinge guide/jig are you guys useing? I would really like a full length one that does all 3 hinges at once. Today was 6 doors and jams routered with a single hinge jig. That is 36 measures and 36 fixture moves. That is really slowing me down.

Cole

Porter Cable. Got an extra if you are interested.:thumbsup:
 

·
slave driver
Joined
·
82 Posts
hardware gigs

R-A-S industries of coatesville Pa (610) 383-5070 www.rasind.com
they make and carry every jigs, guides router templates for every known piece of door hardware (butt hinges,offset pivots,locks,strikes,etc)
ask for Dick or Ricky:thumbsup:
 
1 - 5 of 5 Posts
Top