Contractor Talk - Professional Construction and Remodeling Forum banner

Hilti TE 905 oppinions

15013 Views 9 Replies 9 Participants Last post by  Project_Pat
I have a large slab on grade floor to trench to completely change and move around the plumbing drains/vents ect. I plan on cutting the trenches in the 4" thick non reinforced slab with a concrete saw and then jackhammering.

Is the Hilti TE 905 potent enough to handle this job or should i rent/buy a 90 lb. air jackhammer.
1 - 1 of 10 Posts
A 905 might be a quick n easy way to knock out a couple yards of 'crete, but beyond that....... call in for some air power.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.