Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
i have to remove like 140 sf of plastic marble around the tub, install like 70 sf of wonder board or backer board in place of part of the plastic marble and after that set stone tile over the tub and around it, about 140 sf of tile. does any one knows how to remove the plastic marble and how much can i charge for that work. please advise me..... thnak you very much. :Thumbs:
 

·
Banned
Joined
·
14,078 Posts
You can usually use a knife to cut the seams where they are caulked and use a wonder bar placed where a stud is behind the dry wall to pry big sections right off the walls. Just smack the stuff with a hammer where it is hollow under it and it will crack and break into pieces.

Get a couple of 5 gallon buckets for the small pieces, and carry the rest of the big pieces out by hand.

It will come out a lot faster than somebody can carry it away.
 
1 - 2 of 2 Posts
Top