Contractor Talk - Professional Construction and Remodeling Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
272 Posts
Cut the male end off of a GFCI three way cord, wire it to you panel box? pull trough conduit(s)

You want your transformer as close to the load as possible as the voltage drops, LINE LOSSES increase , Center of mass( load) demand, MAYBE even TWO transformers to keep runs short??

mount the trannys under the deck under one of many dry storage systems sold for under deck use? One less fire hazard for inside the home......

Why not a 60-100 Amp 240VAC out door rated panel at the deck area for cooking etc?

Welded gas lines or the thin wall stainless steel that will burn through from low voltage leaks? I'd buy a CO2 gas +natural Gas, detector tomorrow.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top